Call our Sales Executive
Mobile: 94431 88820 / 94421 08820
Mail us @ info@malatimachines.com
Maas Exchange Offer

MaaS Diesel Forklifts

Specification Data

  • Quality
  • Option
  • 1-1.5 Ton
  • 2-2.5 Ton
  • 3-4 Ton
  • 4-5 Ton
  • 5-7 Ton
  • 8-10 Ton

Innovation Power Train System

(This function belongs to option not for standard model)

Maas Internal combustion Forklifts utilize innovation power train system - PSD axle for some special order or high demand applications.


PSD Axle Technical Advantage

Safer
New auto-parking brake system - Wet Brake
  • In an emergency, this Brake System stops vehicles automatically
More Compact
  • New Service Brake System
  • Simplify the service brake system
  • Compact size & Flexible mounting (50% less weight & volume)
  • A transmission is built inside axle housing
More Functional
Anti-Rollback
  • Adopting a one way clutch to prevent it from rolling back on the slop

Complete Hydraulic Steering System

  • Eliminate friction and prevent over turning and resilience
  • Reduce components and maintenance
  • Lower noise and less inner leakage
  • A little amount of oil ensure the diversion much easier and more flexible

 

Powerful Cooling System

With an extra-large radiator, the heat dissipation area and radiator volume are 1.25 times of normal radiator. The special structure of heat dissipation not only guards against overheat of engine, but also cuts servicing. Our cooling system is suitable for you in hot area.


Intelligent Instrument Clusters

Self-diagnose and high accuracy sensor remind operator for regular service and increase safety.



High Air Intake

Air intake in high position which keep away dirt and improve engine efficiency and operate life



Strong Structure Exhaust Pipe

Double-layer stainless steel exhaust pipe is solution for rupture by vibration of engine start. This structure keeps the operation life, more durable than single-layer and the tenacity also higher than double-layer iron structure.

Excellent Lift Hydraulic System

  • Safety valve prevent fork dropping suddenly when hydraulic hose damage.
  • Tilt locking valve cut tilt cylinder and keep stopping mast tilt angle when engine stop.
  • Flow control valve prevent lift cylinder dropping suddenly when under loading state.


Intelligent Active Safety System With Seat Sensor

(This function belongs to option not for standard model)

Intelligent control system with sensor under seat and safety belt. The system need sensor tests the weight and operator ties safety belt on seat at the same time, then the start button will work.


Front Light Guard

We focus every parts of our Forklifts, even very small point will show our carefulness.



Back Mirror

Wide vision back mirror keeps safety while working.

Full-float Structure

Maas utilizes a full-float structure, which locates an engine and Forklifts body away from vibration. It will reduce vibration. Specifically, the rubber mount is the key to vibration absorption, and we execute thorough low vibration measures, such as developing our original material and shape that are superior in vibration absorption. This structure also helps reduce the noise.


Suspension Seat

The comfortable genuine leather seat has handrails and safety belt. The seat can horizontally adjust in 10cm, and can rebound to the operator weight comfortably and safely. The seamless cover of the seat is waterproof and durable, which gives the operator a comfortable manipulation environment.


Adjustable Steering Wheel

Our steering wheel has ample adjustments fore-and-art to suit each operator.



Cabin

(This function belongs to option not for standard model)

Our cabin support comfort environment for operator, strong cabin will also give well protection. Also you can install in air condition or Heater for extreme working environment or getting more comfortable operate environment. Furthermore, you'll never worry about inconvenience maintenance for Forklifts. Our design can suit all your mentioned.

Reliable Engine

Maas choose world famous brand name CUMMINS & ISUZU diesel engine for our Forklifts.

For CUMMINS, the high displacement and power output of the 4-cylinder naturally aspirated A2000/A2300 45-60 hp (34-45 kW) and B3.3 60-85 hp (45-63 kW) engines offer big power in a small cost-efficient package. With Cummins legendary standards for reliability and durability, result in superior performance every day, every month and every year. CUMMINS engines can meet all current Tier 3/Stage 3 standards.

ISUZU C240, 4JG2 and 6BG1 engine is well known as its High Output, Low Fuel Consumption and Low Emission; Low Noise; High Reliability and Durability; Easy Maintenance and Operation. ISUZU engines can meet EU 3 standards.

Engine & power train

Engine available: CUMMINS & ISUZU
Exhaust gas purifier (catalytic muffler) (Diesel)
Spark arrester
Upward exhaust muffler
LPG swing down bracket(LPG)
PSD Axle

Exterior

Fuel cap with key
Steel cabin
Steel cabin with fan
Steel cabin with aircondition
Steel cabin with heater
Rear view mirrors (pair)
Fire extinguisher

Tire

Air tire
Solid tire
Color non-marking tire
Double front tire

Mast

2-stage free view mast
The mast enables a wide view with excellent forward visibility.

2-stage full free view mast
This is ideal for sites with height limitations, where the large free lift is required.

3-stage full free view mast
The mast extends in three stages and high level loading is easily performed.

Attachments

Attachments available: KAUP & CASCADE



Side shifter


Fork positioner



Rotating roll clamp


Bale clamp



Push-Pulls


Multi Pallet Handlers
Remarks: Other options available on request

1-1.5 Ton

Characteristic 1 Model   CPCD10 CPCD15
2 Power type   Diesel Diesel
3 Rated capacity kg 1000 1500
4 Load center mm 500 500
5 Lift height mm 3000 3000
6 Fork size L'W´T mm 920x100x35 920x100x35
7 Mast tilt angle F/R º 6/12 6/12
8 Turning radius mm 1990 1990
9 Ground clearance mm 115 115
10 Overhead guard height mm 2045 2045
11 Fork overhang mm 396 396
Performance 12 Max driving speeds (with load) km/h 15 15
13 Max lifting speeds (with load) mm/s 480 480
14 Max grade ability (with load) % 20 20
Dimensions 15 Overall length (without forks) mm 2268 2268
16 Overall width mm 1070 1070
17 Overall height fork raised
(with backrest)
mm 4020 4020
18 Mast height mm 1995 1995
Chassis 19 Front tyres   6.50-10-10PR 6.50-10-10PR
20 Rear tyres   5.00-8-8PR 5.00-8-8PR
21 Wheelbase mm 1400 1400
22 Tread Front/ Rear mm 910/900 910/900
23 Self Weight kg 2700 2700
Drive 24 Battery Voltage/Capacity V/Ah 12/65 12/65
25 Engine Model   NC485BPG NC485BPG
26 Rated output kw/r.p.m 30/2600 30/2600
27 Rated torque N.m/r.p.m 131/1800 131/1800
28 NO.of cylinders   4 4
29 Displancement L 2.27 2.27
30 Fuel tank capacity L 38 38
31 Transmission number of speed number of speed F/R   2/2 MT(1/1 AT) 2/2 MT(1/1 AT)
Note: We can meet the various specific requirements, masts, optional cabin, fork length etc.,

2-2.5 Ton

Characteristic 1 Model   CPCD20 CPCD25
2 Power type   Diesel Diesel
3 Rated capacity kg 2000 2500
4 Load center mm 500 500
5 Lift height mm 3000 3000
6 Fork size L´W´T mm 1070x122x40 1070x122x40
7 Mast tilt angle F/R º 6/12 6/12
8 Turning radius mm 2240 2240
9 Ground clearance mm 120 120
10 Overhead guard height mm 2140 2140
11 Fork overhang mm 472 477
Performance 12 Max driving speeds (with load) km/h 20 20
13 Max lifting speeds (with load) mm/s 450 450
14 Max grade ability (with load) % 20 20
Dimensions 15 Overall length (without forks) mm 2525 2582
16 Overall width mm 1200 1200
17 Overall height fork raised
(with backrest)
mm 4020 4020
18 Mast height mm 2060 2060
Chassis 19 Front tyres   7.00-12-12PR 7.00-12-12PR
20 Rear tyres   6.00-9-10PR 6.00-9-10PR
21 Wheelbase mm 1625 1625
22 Tread Front/ Rear mm 960/980 960/980
23 Self Weight kg 3500 3850
Drive 24 Battery Voltage/Capacity V/Ah 12/100 12/100
25 Engine Model   C240 C240
26 Rated output kw/r.p.m 34.5/2500 34.5/2500
27 Rated torque N.m/r.p.m 139/1800 139/1800
28 NO.of cylinders   4 4
29 Displancement L 2.369 2.369
30 Fuel tank capacity L 60 60
31 Transmission number of speed number of speed F/R   2/2 MT(1/1 AT) 2/2 MT(1/1 AT)
Note: We can meet the various specific requirements, masts, optional cabin, fork length etc.,

3-4 Ton

Characteristic 1 Model   CPCD30 CPCD35 CPCD40
2 Power type   Diesel Diesel Diesel
3 Rated capacity kg 3000 3500 4000
4 Load center mm 500 500 500
5 Lift height mm 3000 3000 3000
6 Fork size L´W´T mm 1070x125x45 1070x125x50 1070x125x50
7 Mast tilt angle F/R º 6/12 6/12 6/12
8 Turning radius mm 2400 2500 2700
9 Ground clearance mm 120 120 120
10 Overhead guard height mm 2170 2170 2170
11 Fork overhang mm 505 505 505
Performance 12 Max driving speeds (with load) km/h 20 20 20
13 Max lifting speeds (with load) mm/s 430 430 400
14 Max grade ability (with load) % 20 20 20
Dimensions 15 Overall length (without forks) mm 2630 2755 2905
16 Overall width mm 1250 1250 1250
17 Overall height fork raised
(with backrest)
mm 4060 4060 4060
18 Mast height mm 2090 2090 2100
Chassis 19 Front tyres   28x9-15-12PR 28x9-15-12PR 250-15-16PR
20 Rear tyres   6.50-10-10PR 6.50-10-10PR 6.50-10-10PR
21 Wheelbase mm 1625 1750 1900
22 Tread Front/ Rear mm 1000/980 1000/980 1034/980
23 Self Weight kg 4400 4650 4850
Drive 24 Battery Voltage/Capacity V/Ah 12/100 12/100 12/100
25 Engine Model   C240 4JG2 4JG2
26 Rated output kw/r.p.m 34.5/2500 44.9/2450 44.9/2450
27 Rated torque N.m/r.p.m 139/1800 184.7/1800 184.7/1800
28 NO.of cylinders   4 4 4
29 Displancement L 2.369 3.059 3.059
30 Fuel tank capacity L 60 62 65
31 Transmission number of speed F/R   2/2 MT(1/1AT) 2/2 MT(1/1AT) 2/2 MT(1/1AT)
Note: We can meet the various specific requirements, masts, optional cabin, fork length etc.,

4-5 Ton

Characteristic 1 Model   CPCD40 CPCD45 CPCD50
2 Power type   Diesel Diesel Diesel
3 Rated capacity kg 4000 4500 5000
4 Load center mm 500 500 500
5 Lift height mm 3000 3000 3000
6 Fork size L´W´T mm 1070x150x50 1070x150x50 1070x150x50
7 Mast tilt angle F/R º 6/12 6/12 6/12
8 Turning radius mm 2835 2835 2835
9 Ground clearance mm 120 120 120
10 Overhead guard height mm 2275 2275 2275
11 Fork overhang mm 550 550 550
Performance 12 Max driving speeds (with load) km/h 20 20 20
13 Max lifting speeds (with load) mm/s 380 380 380
14 Max grade ability (with load) % 20 20 20
Dimensions 15 Overall length (without forks) mm 3115 3115 3115
16 Overall width mm 1480 1480 1480
17 Overall height fork raised
(with backrest)
mm 4100 4100 4100
18 Mast height mm 2210 2210 2210
Chassis 19 Front tyres   28x12.5-15 28x12.5-15 28x12.5-15
20 Rear tyres   7.00-12 7.00-12 7.00-12
21 Wheelbase mm 2000 2000 2000
22 Tread Front/ Rear mm 1230/1190 1230/1190 1230/1190
23 Self Weight kg 6150 6370 6650
Drive 24 Battery Voltage/Capacity V/Ah 24/65´2 24/65´2 24/65?á2
25 Engine Model   Cummins
B3.3-C80
Cummins B3.3-C80 Cummins B3.3-C80
26 Rated output kw/r.p.m 60/2200 60/2200 60/2200
27 Rated torque N.m/r.p.m 292/1600 292/1600 292/1600
28 NO.of cylinders   4 4 4
29 Displancement L 3.3 3.3 3.3
30 Fuel tank capacity L 100 100 100
31 Transmission number of speed F/R   2/1 AT 2/1 AT 2/1 AT
Note: We can meet the various specific requirements, masts, optional cabin, fork length etc.,

5-7 Ton

Characteristic 1 Model   CPCD50 CPCD60 CPCD70
2 Power type   Diesel Diesel Diesel
3 Rated capacity kg 5000 6000 7000
4 Load center mm 600 600 600
5 Lift height mm 3000 3000 3000
6 Fork size LxWxT mm 1220x150x50 1220x150x60 1220x150x65
7 Mast tilt angle F/R º 6/12 6/12 6/12
8 Turning radius mm 3300 3300 3300
9 Ground clearance mm 170 170 170
10 Overhead guard height mm 2450 2450 2450
11 Fork overhang mm 595 595 595
Performance 12 Max driving speeds (with load) km/h 24 24 24
13 Max lifting speeds (with load) mm/s 300 300 300
14 Max grade ability (with load) % 20 20 20
Dimensions 15 Overall length (without forks) mm 3540 3540 3540
16 Overall width mm 1910 1910 1910
17 Overall height fork raised
(with backrest)
mm 4380 4380 4380
18 Mast height mm 2732 2732 2732
Chassis 19 Front tyres   8.25-15-14PR 8.25-15-14PR 8.25-15-14PR
20 Rear tyres   8.25-15-14PR 8.25-15-14PR 8.25-15-14PR
21 Wheelbase mm 2300 2300 2300
22 Tread Front/ Rear mm 1400/1534 1400/1534 1400/1534
23 Self Weight kg 7900 8160 8400
Drive 24 Battery Voltage/Capacity V/Ah 24/75x2 24/75x2 24/75x2
25 Engine Model   6BG1 6BG1 6BG1
26 Rated output kw/r.p.m 82/2000 82/2000 82/2000
27 Rated torque N.m/r.p.m 415/1560 415/1560 415/1560
28 NO.of cylinders   6 6 6
29 Displancement L 6.494 6.494 6.494
30 Fuel tank capacity L 140 140 140
31 Transmission number of speed F/R   2/2 AT 2/2 AT 2/2 AT
Note: We can meet the various specific requirements, masts, optional cabin, fork length etc.,

8-10 Ton

Characteristic 1 Model   CPCD80 CPCD100
2 Power type   Diesel Diesel
3 Rated capacity kg 8000 10000
4 Load center mm 600 600
5 Lift height mm 3000 3000
6 Fork size L´W´T mm 1220x170x70 1220x170x70
7 Mast tilt angle F/R º 6/12 6/12
8 Turning radius mm 3700 3900
9 Ground clearance mm 250 245
10 Overhead guard height mm 2585 2585
11 Fork overhang mm 700 718
Performance 12 Max driving speeds (with load) km/h 26 26
13 Max lifting speeds (with load) mm/s 380 310
14 Max grade ability (with load) % 20 20
Dimensions 15 Overall length (without forks) mm 3940 4260
16 Overall width mm 2165 2245
17 Overall height fork raised
(with backrest)
mm 4420 4330
18 Mast height mm 2700 2850
Chassis 19 Front tyres   9.00-20-14PR 9.00-20-14PR
20 Rear tyres   9.00-20-14PR 9.00-20-14PR
21 Wheelbase mm 2500 2500
22 Tread Front/ Rear mm 1600/1700 1600/1700
23 Self Weight kg 10950 12510
Drive 24 Battery Voltage/Capacity V/Ah 24/65x2 24/65x2
25 Engine Model   6BG1 6BG1
26 Rated output kw/r.p.m 82/2000 82/2000
27 Rated torque N.m/r.p.m 415/1560 415/1560
28 NO.of cylinders   6 6
29 Displancement L 6.494 6.494
30 Fuel tank capacity L 140 140
31 Transmission number of speed number of speed F/R   2/2 AT 2/2 AT
Note: We can meet the various specific requirements, masts, optional cabin, fork length etc.,